Equipment & Technology

Flexicon system cuts dust at graphite plant

One of the world’s largest global processors of graphite has installed a Flexicon system to eliminate fill weight inaccuracies and significantly reduce dust.

One of the world’s largest global processors of graphite has installed a Flexicon system to eliminate fill weight inaccuracies and significantly reduce dust.

Asbury graphite & carbons’ installation in the Netherlands opened in 2014 to take in raw graphite from around the world, reduce it into fine particles through a variety of milling and screening processes, and fill 1000 kg bulk bags and smaller bags, based on customer needs.

From the beginning, the plant operators experienced problems with inaccurate fill weights of milled graphite, as well as issues with dust control.  

“We hadn’t decided what equipment we should go with,” Marc Stassen, former general manager of European operations said. The existing equipment was rudimentary and produced off weight bags. 

“We would only find out when the product reached the shipping department that we filled 920 kg instead of 1000 kg, for example,” he said.

The bulk bag filler frames operated with a poorly designed bag spout seal that wasn’t reliable. 

“Very often the seal inflated incorrectly or wasn’t strong enough or exploded,” Stassen said. As a result, dust and fine particles escaped, putting the plant’s compliance with Dutch health and safety guidelines at risk. Spills were also occurring with the original bulk bag dischargers.

On the recommendation of Dutch distributor Matec Techniek, the company turned to Flexicon (Europe) Ltd., which specialises in bulk bag filling and discharging systems. 

“We tried one bulk bag filling station, and that reduced our dust big time,” Stassen said. “So, we chose to go forward with Flexicon for all 11 stations, followed over the years by nine bulk bag dischargers and numerous flexible screw conveyors. They reduced dust tremendously in the plant.”  

Clean fills at the target weight

The bulk bag fillers are arranged in pairs beneath bins holding the finished graphite product. An operator inserts the bag loops into the fill head’s four retractable hooks and pulls the inlet spout of the bulk bag upward over a heavy-duty flexible collar, which inflates to create a dust-tight seal. A filtered air displacement vent at the fill head prevents escape of dust during filling. “Nothing can escape,” Stassen said.

The operator sets the target weight on the programmable logic controller (PLC) and initiates the filling cycle.  A slide gate opens above the filling chute and a rotary valve meters product from the bin above. Load cells beneath the deck are linked to the PLC, which closes the slide gate when the bag reaches the target weight. As the bag fills, a densification/deaeration deck vibrates to stabilise the bag for storage and shipment. The operator deflates the bag spout seal, ties off the bag, and removes it with a forklift.

Each operator runs two fillers side by side, connecting a second bag while the first one is filling. When the first bag is full, the PLC automatically signals the system to begin filling the empty bag. “The operator is continuously busy hanging new bags and taking away full bags,” Stassen said. 

Dust-free bulk bag discharging and conveying, too

Asbury’s plant unloads incoming raw materials with nine Bulk-Out BFF bulk bag dischargers, designed to eliminate dust during discharging, collapse and removal of empty bulk bags, increasing plant safety.

Bulk bags of incoming material are loaded by forklift into the discharger frames. Operators create a dust-free bag/hopper interface by connecting the bag spout to the Spout-Lock clamp ring which sits atop the Tele-Tube telescoping tube. During discharge, the telescoping tube lowers the clamp ring as the bag empties, applying continual downward tension to keep the spout taut. 

Promoting evacuation, Pop-Top extension arms on the dischargers’ upper frames automatically raise the bulk bag into a steep V shape. Flow-Flexer bulk bag activator plates raise and lower the opposite bottom edges of the bag, directing material toward the bag outlet spout.

“In the past,” Stassen points out, “we hung the bag from a frame and let the material gravity fall. The bag would look empty but still had 20 or 30 kg (44 or 66 lb) inside and, when we removed the bag, the material ended up on the floor. Now no material remains.”   

Different conveyors move different materials

From the 140 l floor hopper below each bulk bag discharger, a fully-enclosed flexible screw conveyor ranging in length between 8 and 16 metres moves the material to several silos. 

The Bev-Con conveyors specified are designed to propel difficult-to-move materials that tend to pack, cake, smear, plug or fluidise—or break and slip in the case of graphite—without crushing or grinding material against the tube wall. 

Feeding the jet mill line, a Flexi-Disc tubular cable conveyor moves graphite and coke powder from a dedicated bulk bag discharger. The fine particles exiting the bag flow into a rotary valve that meters them into the conveyor, which consists of ultra-high molecular weight polyethylene conveying discs attached to a steel cable and enclosed inside a polymer tube. The convey line is a continuous circuit, kept under tension by a wheel near the inlet end and driven by another wheel at the discharge end. The material rides gently in the spaces between the discs. The convey line makes a 90° turn past the inlet and moves vertically to 9 metres in height before turning 90° again to the discharge point above the feed hopper and downspouting to the jet mill. The gentle movement reduces risk of abrasion, and the enclosed circuit ensures dust-free operation. 

After processing, another set of flexible screw conveyors, ranging from 4 to 8 metres, transfers the materials to the bins above the bulk bag filling stations.   

Since the first bulk bag fillers and dischargers arrived, Stassen has added only Flexicon systems. “We didn’t look at other equipment. We have good service…they are quickly here to support us, we are good partners at this moment and they understand our needs and issues best.”  

Send this to a friend